Product Granular Tea
Product Behavior Free Flow
Fill Weight/Pouch 5g
Sachet dimension 64mm x 64mm (W x L)
Sealing area Vertical and horizontal seal, 10mm
Open film width 512mm
Speed 45-50 Strokes/minute/lane
Type of sealing 4 side seal
Density To be confirmed

Vertical Form Fill and Seal Machine for Powder Filling

Machine Model INP- 600P
Main Frame Fabricated MS with powder coated
Adjustable leveling pads
Proper safety guards
Coaster wheel are provided for any easy location of the machine



NOTE: – Machine design may change after getting order confirmation.

Unwinding Arrangement

: Maximum film width – 600mm (Filter paper)
: Maximum reel diameter- 300mm
: Motorized control mechanism.
: Electromechanical web edge controller to keep the film in center.
: 4 No. adjustable leveling pads.
: Servo operated paper pulling.
: Tower light to show the working process of machine.

 Filling System

: Indexation motor volumetric cups with sliding disc.
: Nos. of Lane- 4)
: 30kg capacity hopper of SS- 316 make
: Inner Chamber provision to keep the product level uniform in hopper
: Filling accuracy 3 sigma +/- 1 %
: Hopper level sensor.

Sealing Unit

: Servo operated Mechanism.
: Sealer frame fabricated by carbon steel channel
: Sealer – SS-410
: Spring loaded equal pressure setting

Pulling Unit

: Pull roller shaft SS- 304
: Pull roller- Polyurethane.
: Pulling the laminate being pulled by servo system to provide more speed to machine.

Film Turn Bar Unit

:  Powder coated MS frame.
:  Aluminum rollers.
:  Film center aligning knobs.
:  The laminate is coming thru web aligner and it being cut by center slitter and distribute in two equal part as per front collection operation.

Control Panel

: IP 55 Separation of control & high voltage. (Rittal/BCH)

Electrical Equipment’s

  • Temperature is Control through PLC using RTD card.
  • SSR- Union
  • Vertical Heaters- 200-300W/110V
  • Horizontal Heaters- 350W/110V
  • SMPS- 24V/10AMP
  • Switch Gears- Schneider Electric
  • Push Buttons & Selector Switches- Telemechanic.
  • Cables & Wire- Lapp Cables/Finolex.
  • Electrical Motor- Crompton/Bonfiglioli. Servo Motor & drive- Allen Bradley/Omron.

Specifications / electronics

  • PLC – Allen Bradley/Omron.
  • Panel View- Allen Bradley/Omron.
  • AC Drive- Allen Bradley/Omron.
  • Servo Drive- Allen Bradley/Omron
  • PLC 1400
  • Photocell- P&F
  • Proximities- P&F
  • Limit Switches- Honey Well
  • Electrical Supply Required- 3Ph x 220/380/415VAC +/- 10% 4 wire 50/60 Hz 10KW with/without natural as required.
  • Control Voltage- 24V
  • Air Supply Required- Up to 4 CFM @ 6bar.
  • Machine Dimension- 3000mm x 210mm x 2400mm (L x W x H)
  • Machine Weight- 2800Kg approx.


There are no reviews yet.

Be the first to review “TEA BAG PACKING MACHINE – 4-LANE”

Your email address will not be published. Required fields are marked *