- Quote 1
- Quote 2
DOY BAG FILLING MACHINE (SIDE VALVE)
Filling and capping monoblock suitable for automatic filling of stand up pouches. Machine is equipped by pouches magazine enabling automatic feeding of pouches to the starwheel. Filling is done by means of Nr. 4 gear pumps,. Machine has automatic closing unit for screw caps. After filling and capping are bags rejected to the outfeed conveyor.
Target weight: 750g
Packing speed: Up to 1500BPH
Bag size: W150mm x H240mm x D80mm
Bag shape: Doy Rectangle
Cap: Plastic screw cap 10mm
FILLING AND CAPPING MACHINE
PNEUMATIC HEAD, FILLING HEAD, CAPPING HEAD
The machine is suitable for flexible pouches (with an already existing spout) with liquid / semiliquid products by mean of a Doselite® volumetric piston filler with a 50-1300 ml dosing range and closing the same with 1 size of plastic screw cap. All the parts in contact with the product are manufactured with AISI 316 L stainless steel and PTFE and FKM gaskets. The filling and capping stations stand in a 600 x 600 mm cabin with front and back access doors. The machine features an automatic vibrating base cap sorter and feeder. The cap tightening is performed by a pneumatic motor or by a hysteresis magnetic clutch, depending on the requirements.
- The machine main frame is stainless steel AISI 304 made and stands on adjustable height feet.
- All supports and shaft on the machine, that could get in contact with the product are stainless steel AISI 304 made.
- Loading rail for one format of pouch, AISI 304 made. The pouches infeed is performed by the operator manually and/or with the rail
- Starwheel for one format of pouch, AISI 304 made.
- Dosing valve support, managed by a pneumatic system with up / down movement.
- Volumetric filling unit composed by:
- Nr 1 volumetric dosing unit from 50 to 1300 cc in AISI 316 L stainless steel
- Nr 1 three ways DN15 rotary valve
- Nr 1 pneumatic 0.5” – 2 ways no drop valve with shut off nozzle
- Flexible hose
- Single head capping unit composed by:
- Nr 1 vibrating base cap sorter / feeder AISI 304 made
- Nr 1 caps chute in s/steel AISI 304 with photocell
- Nr 1 caps releasing head
- Nr 1 pneumatic motor
- Nr 1 s/steel chuck for one size of plastic screw cap
- Electrical regulation of the height of the capping head.
- A security clutch system stops the machine in case of problems on the star so as not break any pouch.
- Electrical photocell is posed in the entrance; in case of no arrival of pouches the machine doesn’t run.
- Electrical photocell is posed on the exit; in case of problem on the plant the machine stops.
- Electrical photocell stops the machine in case the caps chute is empty, as to avoid any pouch to pass through the machine without cap. Automatically, the machine re-starts as the caps chute is again full of caps.
- Control panel in S / S AISI 304 with auxiliary service at 24 volts.
- Machine managed by PLC.
- Touch screen.
- Height of conveyor from floor 900 ± 50 mm.
- 220V 50Hz single phase, 8 A.
- Air consumption, about 250 Nl/min.
PNEUMATIC HEAD, FILLING HEAD
PISTON FILLING PUMP
|S/STEEL RAIL AND STAR-WHEEL FOR A DIFFERENT POUCH SIZE|
|S/STEEL CUSTOM MADE CHUCK FOR 1 SIZE OF PLASTIC SCREW CAP|
|CAPS CHUTE FOR 1 FORMAT OF PLASTIC CAP WITH RELEASING HEAD|
|Ø 410 MM HOPPER FOR ANOTHER SIZE OF CAP SORTING|
|SURCHARGE FOR HYSTERESIS MAGNETIC CLUTCH (INSTEAD OF PNEUMATIC MOTOR)|
We reserve the right to confirm, revise or integrate this offer after the settlement of all the supply details and the evaluation of the definitive samples